Guides

• Reconnect to VPN using clear vpn ipsec-peer <peername>

Check to make sure IPsec hardware offloading is enabled using show ubnt offload. Use set system offload ipsec enable in the cli if not.

• Generate a passphrase to use as the pre-shared secret
• On each of the routers, configure the VPN as below switching the FQDN and subnets as required
• VPN > IPsec Site-to-Site
  • Show advanced options
  • Automatically open firewall and exclude from NAT
  • + Add Peer
    • Peer > FQDN of remote router e.g. er-l.ubnt.com
    • Description > ipsec
    • Local IP > 0.0.0.0
    • Encryption > AES-128
    • Hash > SHA1
    • DH Group > 14
    • Pre-shared Secret > <secret>
    • Local subnet > e.g. 192.168.1.0/24
    • Remote subnet > e.g. 172.16.1.0/24

• Even using the Automatically open firewall and exclude from NAT option doesn't allow the ER LAN interface to be reachable through the VPN, this fixes that:
• Firewall/NAT > Firewall Policies > WAN_LOCAL > Actions > Edit Ruleset > Add New Rule
• Basic > Description > ipsec
• Advanced > IPsec > Match inbound IPsec packets
• Source > Address > Remote subnet e.g. 10.0.0.0/24
• Destination > Address > Local subnet e.g. 10.0.1.0/24
• Save

• : TODO Change from pre-shared key to certificate-based authentication.

generate vpn rsa-key

configure
set vpn rsa-keys local-key file /config/ipsec.d/rsa-keys/localhost.key
set vpn rsa-keys rsa-key-name er-l rsa-key <er-l public key>

delete vpn ipsec site-to-site peer er-l.ubnt.com authentication mode
delete vpn ipsec site-to-site peer er-l.ubnt.com authentication pre-shared-secret

set vpn ipsec site-to-site peer er-l.ubnt.com authentication mode rsa
set vpn ipsec site-to-site peer er-l.ubnt.com authentication rsa-key-name er-l

• One of the routers was behind PPPoE so it needed TCP MSS clamping enabling on both routers to get HTTPS sites working through the VPN:
  • Wizards > TCP MSS clamping
    • Enable
    • Deselect All
    • Select PPPoE
    • MSS > 1382
• Or in the cli:

configure
set firewall options mss-clamp interface-type all
set firewall options mss-clamp mss 1382
commit
save

• TODO:
  • Get DNS across the VPN working (Possibly using DNS-views)
  • Change the P1 and P2 Security Associations.
  • Change the IKE Key Exchange from version 1 to version 2?
  • https://help.ubnt.com/hc/en-us/articles/216771078-EdgeRouter-Modifying-the-Default-IPsec-Site-to-Site-VPN