substitutions:
  devicename: sonoff_rf_bridge
  upper_devicename: Sonoff RF Bridge
  device_platform: ESP8266
  device_board: esp01_1m
  device_ip: 10.0.0.108

# Enable Web Server (optional)
# web_server:
#   port: 80

<<: !include common/base.yaml

logger:
  baud_rate: 0

uart:
  tx_pin: 1
  rx_pin: 3
  baud_rate: 19200

api:
  services:
    - service: send_rf_code
      variables:
        sync: int
        low: int
        high: int
        code: int
      then:
        - rf_bridge.send_code:
            sync: !lambda 'return sync;'
            low: !lambda 'return low;'
            high: !lambda 'return high;'
            code: !lambda 'return code;'
    - service: learn
      then:
        - rf_bridge.learn
    - service: send_advanced_rf_code
      variables:
        length: int
        protocol: int
        code: string
      then:
        - rf_bridge.send_advanced_code:
            length: !lambda 'return length;'
            protocol: !lambda 'return protocol;'
            code: !lambda 'return code;'
    - service: start_advanced_sniffing
      then:
        - rf_bridge.start_advanced_sniffing
    - service: stop_advanced_sniffing
      then:
        - rf_bridge.stop_advanced_sniffing

rf_bridge:
  on_code_received:
    then:
      - homeassistant.event:
          event: esphome.rf_code_received
          data:
            sync: !lambda 'char buffer [10];return itoa(data.sync,buffer,16);'
            low: !lambda 'char buffer [10];return itoa(data.low,buffer,16);'
            high: !lambda 'char buffer [10];return itoa(data.high,buffer,16);'
            code: !lambda 'char buffer [10];return itoa(data.code,buffer,16);'

  on_advanced_code_received:
    then:
      - homeassistant.event:
          event: esphome.rf_advanced_code_received
          data:
            length: !lambda 'char buffer [10];return itoa(data.length,buffer,16);'
            protocol: !lambda 'char buffer [10];return itoa(data.protocol,buffer,16);'
            code: !lambda 'return data.code;'

# Turn the Wifi led on for 2 seconds when the button is pressed to show that it's working
output:
  - platform: gpio
    pin:
      number: GPIO13
      inverted: True
    id: output_wifi_led
light:
  - platform: binary
    id: wifi_led
    output: output_wifi_led
binary_sensor:
  - platform: gpio
    pin: GPIO00
    id: pairing_button
    on_press:
      then:
        - light.turn_on: wifi_led
        - delay: 2s
        - light.turn_off: wifi_led